Product Description 

How it works - NEW! Just Released! Now you can set your wireless spy camera and VCR on auto-pilot to "Record ONLY the action" in and around your home totally hands free!  Whether you're home or not, when motion is detected, this amazing product can turn on your VCR - then automatically send a "Record" command to your VCR!

This Commander pretends it is your VCR's own remote and sends the "Record" and "Stop" commands to your VCR as motion is detected!

This VCR Commander systems also works with multiple camera systems (system expandable to 16+ cameras). If a person starts walking around your house, as they enter Zone 1 the camera monitoring Zone 1 will turn on, and the VCR Commander starts your VCR recording. As they enter Zone 2, the second camera will turn on (camera 1 will turn off) and the VCR will continue to record what's happening in Zone 2. As the person completes a trip around your home (ex. visiting Zones 1-4), the tape will show everything as they move between all four zones.

NEW - LEARNS MOTION SENSOR CODES! The VCR Commander allows you to learn motion sensor codes, so you can have the same motion sensor turn on a camera & turn on/record the VCR. 

When no motion has been detected from the motion detector for 5 minutes - the VCR Commander II will turn the VCR OFF or STOP recording. This will make sure your tape only shows the action and reduces the amount of blank, no action time. 

Record ONLY the Action: Imagine going on a 2 week vacation with the family. When you get home, turn on the VCR and watch everything that happened around your home while you were away. Someone try to visit you? Someone try to break in? Who smashed the mailbox? It's all on tape! 

Another Great Way to use the VCR Commander: Record a video for your spouse or kids. As soon as they walk in the door, the TV and VCR automatically turn on. Then the VCR automatically runs the "play" command. Your video message is delivered with perfect timing. Record directions or chores for their kids when they get home from school. Record a romantic message for your spouse. Great fun and very practical! AMAZING!

And the best thing of all, is that this will work with almost any existing spy camera or surveillance camera system that contains RCA or Coaxial outputs: use with your XCam2 system - no problem; use with your home video camera - no problem; use with one of our great convert cameras - no problem; use a standard board camera - no problem. This system is universal. It is also compatible with quad monitors, observations systems, and other video cameras*.

Hide the Motion Sensor almost anywhere:

Additional motion detectors can be used with this system.  Only $17.99 for each additional motion detector.

 Setup

Works with any Remote Controlled VCR.

Couldn't be simpler!

 Compare

Beware .... of other similar systems sold in the market that will turn "on" too late and turn "off" recording too soon, thus causing you to miss some of the action. Some systems turn "on" too late because the motion detector is integrated into the VCR, thus you will miss some of the activity because with these type integrated systems, the subject must trip the sensor in the area (not before they get there). This is the beauty of having a separate motion detector that can be set in a way that it can detect motion slightly before (in a hallway, doorway, etc) the subject reaches the monitored area. The other problem is that if the subject temporarily goes out of view of the integrated motion system or sits down and relaxes in a chair, some other systems will turn "off" too quickly (less than a minute of inactivity). With our system, you will get 5 minutes to make sure that you don't miss temporary moments of inactivity when the subject is actually still in the area.

 Included Items

• VCR Commander Base
• IR Emitter cable with 3 emitters
• Power Adapter

• Up to 20' ft motion detection range.
• Motion Sensor is 2.5 x 2.5 inches. (So small you can place them anywhere!)
• Easily concealable
• No programming required
• (requires 2 AAA batteries, not included)

Detailed Instructions for setting up the system